Steps to Broom Finished Concrete on Surface

If you know how to Broom Finish Concrete you have successfully managed to counter one of the limitations of concrete as its slippery surface making it risky to walk on, especially for small children. Concrete is assuredly amongst the top surfaces when it comes durability. A simple broom finish would provide greater friction, making it safe for everyone to walk upon. A broom finish would provide the perfectly same durability as that of a regular slab of concrete.

Step-1: Build, Level and Fill the Concrete Forms:

The First step  is to form the concrete slab and then pour it in accordance with the standard Concrete installation methods. These methods include, integrating the forms from wood and then leveling them. Then simply fill up the forms with cement and use a straight board to levels the concrete. Grip the straight board crossways on the top of the concrete form.

Step-2: Finish the Concrete Exterior with a Trowel:

Use a trowel to finish the surface. The trowel is used to smooth out the surface and level it. Using a trowel to finish the surface will also help work the tiny rocks covered in cement to the base of the surface and bring the cement-water mixture at the top.

Step-3: Broom Finish the Concrete Surface:

Take a concrete broom and run it across the concrete surface. Hold the stubbles of the concrete broom at approximately a 45 degree angle with the cement. Keeping in mind in which direction people usually walk on the surface, pull the broom from one corner of the surface to the other direction at a 90 degree angle. Now shift the broom to the edging of the surface where you have applied the broom finish.

 Step-4: Consistency and Edges

It is advised that you keep the pressure exerted on the cement uniform at all times to ensure that a consistent set of marks have been produced on the cement. Then move onto the edges of the concrete slab and finish them. This is where an edge trowel comes in handy. Use the edge trowel to round off the edges of the concrete slab and make a flat margin. This would help form a consistent border for the broom part of the concrete slab finish. However, do not undo your work by allowing people to use it immediately. Give the cement sometime to dry off before allowing people to walk on the concrete slab.

Hiring the best Broom Finished Concrete Contractors in Calgary for your concrete projects is a challenging task. Before hiring do your research about concrete contractors or company to make it easy for you.